control arm hitting the wheel well

[99accord boi]

Had to put the flashlight on it so it will be bright enough. Control arm looks fine. The nut is a little grinded but other than that it's good. Just put touch up paint around the cut so it doesn't rust. I'm looking for pinch molding so it will be a better seal. (If anyone has a link to it, it would be very much appreciated.

Checked my height and I was a quarter inch lower on the passenger so it didn't make sense. I evened it out and it got worse. Lol. I think my adjustable dampening might not be working on that side because I'm full stiff on all four corners.

ur hole looks clean jk

 

[sabSquishy]

Oh in fact my hole is very clean. ;]

 

[CHICOCG5]

I KNO THIS THREAD IS ALMOST A YEAR OLD......after cuttin the hole does it still happen........

 

[Drew707]

I KNO THIS THREAD IS ALMOST A YEAR OLD......after cuttin the hole does it still happen........

it is old but this is happening to me so might as well search n post in one thread. how big did you cut? is cutting the tower worth it? what if i lower the front more so the uca is like resting on the tower so no more smacking noise. i feel like my balljoint is going out so im considering doing this. what do you use to cut? or would a stiffer suspension fix this?

 

[99accord boi]

I KNO THIS THREAD IS ALMOST A YEAR OLD......after cuttin the hole does it still happen........

it is old but this is happening to me so might as well search n post in one thread. how big did you cut? is cutting the tower worth it? what if i lower the front more so the uca is like resting on the tower so no more smacking noise. i feel like my balljoint is going out so im considering doing this. what do you use to cut? or would a stiffer suspension fix this?

both of u post pics of ur ride height
also do u have camber kits?

 

[Drew707]

both of u post pics of ur ride height
also do u have camber kits?

dont have a ride height pic. but i measured and im at 22.5in on stock 15s. no camber kit

 

[99accord boi]

dont have a ride height pic. but i measured and im at 22.5in on stock 15s. no camber kit

those measurements are from floor to top of fender? if so..
yea u deff need to cut

 

[CHICOCG5]

those measurements are from floor to top of fender? if so..
yea u deff need to cut

I LIFTED DA CAR I WAS 23" FROM FENDER TO FLOOR.....DA CAR WAS DUMPED....BUT IT WAS TOO LOW FOR THE STREETS OF NY(pothole city)