Recent content by Mr_Hback01

  1. Mr_Hback01

    DIY-RDX injectors in F23A1

    If using theses injectors after converting to obd1 with a P28, is a resistor box required? Thanks in advance
  2. Mr_Hback01

    Turbo project begun

    Alright, new injectors it is. I will probably wind up finding a used IM and doing the changes on that so I can just bolt it all up when it comes time. Would the RDX injectors work on the f23 without a resistor box? Xenocron has them as well as with some adapters that may be needed and clips...
  3. Mr_Hback01

    Turbo project begun

    So theoretically... if i were to convert to obd1 via p28 and harness, i could still run the stock injectors at the low psi im planning? I know you said youre running a stock ecu, but would an obd1 ecu be able to run the stock injectors? I hate to sound redundant, I'm just looking for as much...
  4. Mr_Hback01

    Turbo project begun

    This was the kind of thing i thought i might have heard somewhere... If not then I will swap out the injectors. Just wasn't sure if I could convert to OBD1 and still run these and provide enough fuel for my low boost application.
  5. Mr_Hback01

    Turbo project begun

    Hey everyone. I don’t post too much on here but I do use the forum for valuable information for my 6th gen. I have laid out a list of parts needed and begun to purchase a few for a turbo project. That being said I do have a few questions regarding the project that I was hoping the gurus on here...
  6. Mr_Hback01

    Question about Oil Cooler

    Alright this is what I had more or less decided too... It is what it is. I will just continue to keep my watchful eye on the oil level and top it off when needed Alright, appreciate the insight, would it benefit a turbo though? Keep oil temperatures down a little? just seemed like it might...
  7. Mr_Hback01

    Question about Oil Cooler

    Much appreciated input. On the oil consumption part: It's not an obscene amount of oil I lose, and Ive talked to the service guys at the dealership and had them check for leaks, they couldnt find any and they said it might just be the nature of the engine. No blue smoke on startup and I don't...
  8. Mr_Hback01

    Question about Oil Cooler

    So long story short, my accord likes to drink oil.. Correct me if Im wrong, but Im pretty sure the engine tends to 'consume' a little oil when in higher rpm ranges, and I tend to drive it a lil harder than most of the other moms and grandmas that i see driving these :hihi: so that might be part...
  9. Mr_Hback01

    Headlights and fogs coming

    I figured I couldnt be THAT unique lol
  10. Mr_Hback01

    Fog Light Question

    I spliced into the parking lights and didnt use the switch or relay part of the harness, just used my own switch and wired it up myself.
  11. Mr_Hback01

    Headlights and fogs coming

    Headlights Finished!! Soooo, probably to some viewers disappointment, I nixed the amber paint in the corners of my headlight, didnt feel like doing all the taping and such, and I am please with how I painted the headlights anyways. Left some chrome in corner and amber strips in, havent seen...
  12. Mr_Hback01

    Fog Light Question

    Alright, completed fog light install including splice into parking lights, then ALSO wiring up a switch that I had with some leftover speaker wire I had laying around. 3000K DDM HIDS!!!! Light up the road very very nice. I am very pleased! :rock: some pictures
  13. Mr_Hback01

    Fog Light Question

    Thank you much. So the curve for the bar on the inside is supposed to sit back more or less flush on that bar? Means im gonna have to shave a little off to get them to fit flush. Going to use some pipe strapping to secure to bumper a little better. At the moment sip ties FTW!!
  14. Mr_Hback01

    Fog Light Question

    Can someone post a picture of the 02-02 fogs on their bumper? I installed mine but they look like they protrude a little more than what I was thinking. This would be much appreciated!!!
  15. Mr_Hback01

    Newcomer to 6thgen

    So i finally made a members ride thread if anyone wanted to see that, direct yourself that way! will try and keep up to date pictures
See more

Latest posts

Random media

IMG 0403
while painting
Next to my old CB7 the day I brought her home
4327.jpg
2b0b9e1f 2414 465d b245 1ac835d46579
Back
Top