Anybody Done Naturally Aspirated On V6 Before

[LitoCG2Rider]

Way to bring it back from the graveyard.lmao.
The cls cams really worth it,I heard a good gain on it from v6p so I got it done,even tho I got it install in my engine.im to lazy to buy the boomslang pnp for my neo so I can get the best out it.that is the only mod I did to the engine.total cost spent on parts|labor was 1425. 800 for install.250 for cams.apexi neo 375

 

[tnguyen600]

You're using the oem CL-S camshaft or cam gear?

Does anyone know gains with the boomslang and without?

I just looked up the part number on a site for the cam shaft. 14100-PGE-A00 Camshaft FR do i need the RR too? It's going for 134 each.

 

[Sketch o5]

there is an edit button for a reason

and you need the cl-s cam. if you get cam gears, thatd be pointless.

 

[tnguyen600]

haha i was thinking go back to edit, but i've already gone to far by typing it in.

 

[BlkCurrantKord]

Boomslang is a company that makes a harness that connects an fuel controller to your ECU

 

[tnguyen600]

Is there a perference for the controller? Rather then the neo, what about the e-manage ultimate or unichip? I need the FR and RR camshaft?

 

[BlkCurrantKord]

Best bet would be to find a shop/tuner who's familiar with a particular tuning software. Rather than picking one and trying to find a tuner.

 

[WHEEELMAN]

Is there a perference for the controller? Rather then the neo, what about the e-manage ultimate or unichip? I need the FR and RR camshaft?

http://v6performance.net/forums/showthread.php?t=202&highlight=cl-s+cam+group+buy
This link above should give you some info as well as a parts list for the swap.

FR - front head camshaft RR - rear head camshaft. Buy the FR and RR.

98-00 w/ Distributor, you need to machine the Rear cam for the distributor. Dunno what to recommend to have it machined.
01-02 w/ DIS, no cam machining is needed.

I recommend you do the cam swap in addition to a timing belt/water pump change. It will be more cost effective if you do it all at once.

Tuning - I run the UNICHIP in my car, and will need to have it re-mapped or tuned along with my CL-s cams and intake upgrade. UNICHIP does have a map for the CL-s cams as V6P members had this done. You could buy a used one and have it re-mapped or re-tuned. Might even be a website that sells the UNICHIP new w/ the necessary map you need.


The Apexi S/VAFC's and E-manage are over my head, can't help you there. One thing I do know is that you can use the Apexi unit for tuning w/ cams, but the UNICHIP would yield more HP/TQ for tuning. not much more, but more.

 

[jbisselwhiteac6]

I just realized that their are a limited amout of v6 guys on here unfortunately

 

[tnguyen600]

hrmm thanks for the info guys. now i gotta see if the numbers are worth the money lol anyone know?