Discussion in 'DIY - Do It Yourself Forum' started by BlkCurrantKord, May 21, 2007.
Yep, youre right. My bad.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Hello guys, I'm new here.
I'm from France and drive an 1999 2,0L Accord coupe.
I'm very interested in swapping 4 lugs to 5.
I have a question, on mine, I already have front double pistons caliper and 282mm brake discs, do you have the same on yours ?
Will the V6 Caliper and bracket fit on the I4 knuckle as well?
the fronts, yes. they all use the same spindles in the front. the rears are all the same parts for every model with disc brakes.
Question, has anyone figured out (or know the size) of rotors that are the same size as the 4cyl rotors but in the 5 lug configuration? Reason for asking is, I want to do the 5 lug conversion but use my 4cyl calipers temporarily until I source the TL brembo calipers or the 2 piston legend calipers.
Try Civic EP3 Rotors - 04-05 when they switched to 5lug
Centric # 121.40056
vs Accord Centric #121.40039
They're 1.5in larger diameter so likely not but if you wanna try it, go for it. I think at one time someone found something that works but I can't remember what it was off of.
Ah, that will probably work. I'm going to give a try and report back once all said and done
02-05 RSX rears *might* also work.
Separate names with a comma.