flush LOOK

[Millz]

wouldnt it be better to get rid of the rims and buy new ones that are wider + lower offset?

30mm spacer is pretty ****ing huge, any safety issues with that?

 

[IcyAccord]

lol i think that's what we're trying to say.. hahaha

 

[slowaccord]

i have 18x8 +17 and my setup is poking slightly. and people wouldnt really consider mine "hella flush"

i think 0 offset on 17x7 might be close. but hella flush is about WIDTH and offset.

 

[swollen_cu]

17x7 +42 id go with a 10 mm. Since your width is weak, DO IT! running any negative cam,ber? also how low are you?

 

[MrLazie1]

18x9 +35! thats hella flush. you'll need to run negative camber if you're going hella flush. like steve.

 

[Sketch o5]

theyd be flush with the camber set to 0 and a 5mm spacer max.

 

[turbocayenne]

woohooo my old wheels ha..ha... David, your best bet is to sell the wheels and get wheels with better width and offset because the width and the offset of your enkei are pretty weak to start with...
Good luck.....

 

[talontsiawd]

First, there is preference here. People can say you need a 30mm spacer but you don't have to go that far. With my camber (not to mention ride height) 30mm would poke and look bad but 5-10mm would look great.

My brother runs 30mm spacers on his m35 and hasn't had issues at all. It has been alteast a year but he knows people who have been doing it alot longer. I wouldn't do it with aftermarket rims because it would just look so much better to get lower offset wheels but he is rolling his stockers (which actually look really good).

 

[sonnyleq]

Time for new wheels david