h22 swap help ( IAC)

[Russianred]

Bumpin'

 

[jaron001]

is your pin in the correct location at the ecu. i know a few obd2b hondas have to be changed

 

[jaron001]

you can try gettin an whole f22 IM also

 

[Russianred]

I'd rather try out the pin idea.. How do I tell if my pin needs to be repinned? Where to repin it, at the harness, or at the ECU? Which wire..?

 

[finch13]

Well, in Connector B at the ECU, there is a BLK/BLU wire at Pin #23.

I'd imagine the F23 3-wire has a power, ground, and signal (BLK/BLU from ECU), whereas the F22 2-wire is just a signal and ground.

Here's the pinout diagrams:

 

[finch13]

If you want an F22 upper plenum, I think I have one sitting in my room with the 2-wire IACV.

 

[jaron001]

please save this to your hard drive because its linked from another site. that civic is ob2b compare the pins to your harness and if its different change them accordingly

 

[Russianred]

Thank you Finch and Jaron, I'll try that out.

I don't see your picture though Jaron..

 

[jaron001]

see they took them down that fast lol

 

[finch13]

I rehosted his image: