Innovative Mounts

[cantafordaccord]

one mount will make a difference. also what the f*** innovative seems to be a POS company with no quality control at least thats what I see after reading about multiple misshaps and poor comunication

 

[1NonlyAccord]

I sent them an email..They actually responded back on a sunday..we've sent 10emails back and forth..They said they re-designed the mounts 3-4months ago.

he asked to see the picture of my mount to see if it was the new one or not,but have not replied back since.but it was coming from an Iphone so its personal owner or somebody.

but ya apparently I got the old version,due to not having that built in spacer on the drivers side mount..and this mount is to flat to fit on the tranny side.
but the rear went on no problem they said.

I needed all new bolts and hardware to fit the drivers side along with alot of washers..but install looks clean other than the 2 scar marks from a hammer or pry bar from the shop.
and i ziptied the ground wire to the bolt since you loose the 10mm bolt hole for it..ha

yes all those red things are washers.

 

[FunnyVictor86]

your kit doesn't look too bad ... tomorrow i'm gonna take a pic of my stack of washers ... it's embarrassing

 

[1NonlyAccord]

I sent my Tranny mount back to them today,Should get to them by monday..So i should see the new one in a few weeks!
hopfully that will stop the clunking/vibration from the tranny side after installed!

 

[TheHunter]

one mount will make a difference. also what the f*** innovative seems to be a POS company with no quality control at least thats what I see after reading about multiple misshaps and poor comunication

My innovative mounts for the v6 look great, and installed perfectly with no issues....

 

[cantafordaccord]

^^^^^^^^^^^^far as I know the v6 mounts have been good to go since they were originally made. however the 4cyl mounts for the cl and accord have had issues since they came out years ago.wish they would just fix the problem/s permenatly

 

[1NonlyAccord]

Well they did admit they updated the kit and sent me an old one...So MY guess is there trying to ship out old inventory and trying to see if people like me will make it work or not...I made everything work BUT that tranny mount was nowhere near fitting.
so they should receive my returned mount today and send me a new one soon..hopefully.

 

[cantafordaccord]

I also bet they are trying to see if people will take it in the butt and not return there product so they can keep the money

 

[1NonlyAccord]

So still no contact,no replied emails. No replaced mount.
getting very disappointing in my 300+$ investment thats turned into a headache.
Very poor customer service to the public so far to me.

 

[F23A1AT]

I was really looking forward to these issues being resolved by now. I was going to get these to upgrade my mounts in the future. Are these the only aftermarket mount kits available to the 4cyl?