Wheel Fitment Thread

[Geewiz]

it would look flush with a 15mm in the front and 20 or 25 in the back

Thanks. I'd like to go 5-lug/rear disc swap but too much since currently doing 5spd swap, coilovers, eibach sways, front windshield cracked, engine maintenance and UR pulley, on top of needing new rims.

This is more of a quality question than fit but Konig I hope are sturdy? I had Velocity vw035's which I can't find in stock for replacements. I hit a large pothole that legitimately destroyed one. But took it off and the other three were bent on the inside and outside lips like they were made of butter from normal driving. Going to reuse my 215/45/17 Generals on whatever 17" rim I get since they're only a year old.

 

[dazedts]

has anybody put 10"wide rims on? want to see how badly it sticks out

 

[Chris Vu]

has anybody put 10"wide rims on? want to see how badly it sticks out

how "badly" it sticks out ? sounds like you don't like the hellaflushz look. You should go back to 7" .. For me, however, 10 +25 is sexy.

 

[BlackestCoupe]

has anybody put 10"wide rims on? want to see how badly it sticks out

I have 10's, so does Jeffpanya. Thats all I can think of off the top of my head.

 

[Sleeper Cell]

I had 10s on my car for a while too.

 

[Sketch o5]

bee has 10's on his sedan.​

 

[guesswho]

Wondering if 205/45/R16 wheels( i believe the offset is +40) will fit on a non lowered/modded 4door 4cyl TIA

 

[truWarier02]

Those are tire sizes, we need the specs of the wheels (i.e. 16x7, 16x8, etc).

 

[guesswho]

Those are tire sizes, we need the specs of the wheels (i.e. 16x7, 16x8, etc).

16x7, thx

 

[jeffpanya]

18x10 with a 20 offset was pretty damn crazy for me with just natural camber lol, im going back to 9.5's