Wheel Fitment Thread

[JV6]

Enkei RPF1 lol

 

[Ilovemy6thgen]

Enkei RPF1 lol

That's what I'm talking about!

 

[accordingtome]

17x9.5 +56 205/40 All around? 4x114.3-5x120.6 Adapters needed also. I was going to put tein s.techs and roll and relocate tabs?

 

[Valet]

You're likely to poke after adapters and not being very low.

I would suggest going lower than what springs can offer.

I would also suggest 215/45 instead

 

[accordingtome]

You're likely to poke after adapters and not being very low.

I would suggest going lower than what springs can offer.

I would also suggest 215/45 instead

if i use 2 inch adapters ill have 2mm less backspacing than stock, do u know how much "wiggle" room ill have behind the wheel before running into the suspension components? will those extra 2mm hit anything? and....im only using the springs bc i cant afford the coils with all this adapting goin on lol.

Great advice with the tire size too....i just saw that it shouldnt disrupt the speedo all that much at that size.


...reasoning behind this having to work is bc im a honda fanatic and my fathers a corvette fanatic so naturally im using his 35th ann wheels on my gold sedan.

 

[99accord boi]

i spy gramlights
so i believe that doesnt count

hows the fitment with the yellow wheels?

 

[Sleeper Cell]

i spy gramlights
so i believe that doesnt count

hows the fitment with the yellow wheels?

It's the same. 18x9.5 +12 with 215/40/18s lol.

I just threw on some 245/35/18s in the front last night and they're working out a lot better than my 235/40/18s were.

They don't hit the pinch weld any longer.

 

[DrOwZee]

That drift life doe

 

[LeAccord]

205/40 or 215/40 on 18x8 +35 up front ?

And will I be ok running 225/40 on the rear on a 18x9 +38 ? Bumper tab relocated, guards rolled, bumper shaved.

Height will be about 23 - 23.5" fender to ground all around, and I will be adding 15-20mm bolt on spacers all around in a few weeks.

 

[Rsuave24]

Any body running a 20x9?