DIY- wiring foglights to turn on/off with parking lights

[jdm00accord]

Theres a hole covered with a rubber seal bottom right of the brake resouiver, you can see some wires going through it. Its easy

im not stupid...i have already ran about 5 wires through that firewall and i hate crawling up under my dash to pull them into the car. plus the wiring harness that came with my fogs was garbage..as was the relay and the switch. the way i did this was much simpler

 

[inv4zn]

noob question, but just wanted to confirm...

So this way the fogs are only wired to the parking lights? No wires to run through firewall, no relay, no switch, nothing?

Just 2 wires 1 ground, 1 spliced into parking light power?

Thankss =)

 

[dvilla5506]

noob question, but just wanted to confirm...

So this way the fogs are only wired to the parking lights? No wires to run through firewall, no relay, no switch, nothing?

Just 2 wires 1 ground, 1 spliced into parking light power?

Thankss =)

yes all there is to it

 

[inv4zn]

Sweet =)

Thankss

 

[unrealistik]

is this doable with HID Fogs?

 

[inv4zn]

Ok, so I spent hours looking through all the DIY's, and am now stumped. My wires don't look like anything you guys have...so I need this confirmed =(

Colours are actual colours of the wires...lol

Wire A: ground
Wire B: parking light power
Wire C: battery

Anyone confirm? Pretty please?

Also, as unrealistik asked, how are these lights with HID's?

 

[dvilla5506]

Ok, so I spent hours looking through all the DIY's, and am now stumped. My wires don't look like anything you guys have...so I need this confirmed =(

Colours are actual colours of the wires...lol

Wire A: ground
Wire B: parking light power
Wire C: battery

Anyone confirm? Pretty please?

Also, as unrealistik asked, how are these lights with HID's?

http://www.6thgenaccord.com/forums/showthread.php?t=29528&highlight=hid+fog+lights+parking

 

[inv4zn]

^ Sry, I don't get what you're trying to tell me lol

It sais I shouldn't use HID's, and then in the last post, HondaLuver sais it's fine..?

My main question was about the wiring..

 

[dvilla5506]

im guessing its ok if u use a relay.......as for wiring idk about the relay and all that but if ur just doing it to the parking lights just ground them and splice into the lights

 

[inv4zn]

So I'd only need the black and white wires, from my diagram? Throw out everything else?