Recent content by camjohns

  1. C

    3.0 v6 stalls when engine bay is wet

    Searching through various forums, I have found that this is a common thing with Accords. I find that if I wash the engine bay out, my car will stall, and then for the next couple of days will continue to stall while driving until it completely dry's out. I find that if I am able to keep the...
  2. C

    Alternator/ AC belt tensioner torque

    ya thats awesome. Thanks again!
  3. C

    Alternator/ AC belt tensioner torque

    yes sorry this is for a 2000 v6 coupe, and those are the ones im looking for. where were you able to find those at? thanks!
  4. C

    Alternator/ AC belt tensioner torque

    After looking through several threads, and the torque spec sticky i was unable to find the torque spec for the tensioner pulley for the alternator and the a/c. the bolts I'm trying to figure out i believe are 2 10mm and 1 8mm center bolt. thanks!
  5. C

    adhesive for rubber water pump gasket?

    used permatex and it worked great thanks for the help!
  6. C

    stripped lower power steering nut

    Ya it was a pain! i dont think i have had to be that patient in a very long time. haha thanks!
  7. C

    adhesive for rubber water pump gasket?

    Any thoughts on what to use to keep the rubber gasket in place on the water pump rubber gasket? would permatex high tac gasket sealant be alright? I have some laying around, but if need be i can get something else. and is it ok to get a little on the outside of the metal grove the rubber sits...
  8. C

    stripped lower power steering nut

    Re: stripped lower power steering nut Solved Ended up very carefully taking a dremel with cutting tool and cut the nut off, bought new bolt nut and small o ring.
  9. C

    v6 power steering pump pulley bolt torque

    Any ideas what the torque spec is for the v6 pulley bolt? could not find on the torque specs page thanks!
  10. C

    stripped lower power steering nut

    Ya so i have not tried SAE size, when i was working on it, and i tried some ez-out extractor but the socket is too big to get it on the nut. Its a pretty tight space. my wife has the car for the day, but the video i was referencing for this project shows it from the 14 min mark to the 15 min...
  11. C

    stripped lower power steering nut

    2000 honda accord 3.0 ex As i started in to do the timing belt, i found the lower bolt on the power steering pump to be stripped and unable to be loosened. I attempted with a 12mm socket with no luck as it just had no bite, i tried smaller, but would not fit. So now im stuck and trying to...
  12. C

    suspension torque specs?

    Thank you so much! def didn't even think of that
  13. C

    suspension torque specs?

    2000 honda accord ex 3.0 i was wondering if there was a torque listed anywhere for all the suspension components? i am planning on doing my upper control arms on my car and have struggled finding consistant values some have said 30 ft/lbs on the anchor bolts whiles others show 47...
  14. C

    How to tell which motor mount is bad

    Sounds good! Ill see if i can see if anything is leaking and cracked on the front/rear didn't know if there was a mount that typically went bad on this gen that is usually the culprit. thanks!
  15. C

    How to tell which motor mount is bad

    Hello there, i have a 2000 accord ex 3.0 (185,000 miles) and have a motor mount that is bad, but am having issues figuring out which one it is. Is there an easy way to tell? thanks!
See more

Latest posts

Random media

Side 3/1/09
Us
image6
accord a car wash 2
winter mode
Back
Top