This is a common lament on every online forum, regardless of its specialty. Activity waxes and wanes; knowledgeable folks come and go; posts languish or inspire discourse; people contribute or find interest elsewhere... etc etc. My point: the reasons forum activity varies are many, legitimate...
The belt will go slack the instant the tensioner is relieved. If the belt is remains tight, then the friction of the belt grooves ribs is the likely culprit. Just cut the belt. Belts are relatively inexpensive.
2000 Accord LX
154k miles
The front passenger caliper on this car won't retract. I'm stumped what might be the cause.
We've relegated this Accord to "seldom-used" status, so every month or so I drive it around the neighborhood for a mile run. During my most recent circuit, I noticed after...
Firstly...
Congrats on purchasing a 6th Gen Accord! These are wonderful cars with great contemporary lines and run forever with maintenance and Genuine Honda OEM parts. I posted my two cents itemizing things a new Accord owner should expect. Click here to give it a read when you have a chance...
If by "did I replace" you refer to the A/T Clutch Pressure Control Solenoid Valve A/B Assembly specifically, then yes... I did replace. The effect was... buttkiss.
First, though, I removed the existing--and original--solenoid valve assembly and cleaned the clogged screens inside both return...
I’m working through the A/T Clutch Pressure Control Solenoid Valve A/B Assembly test procedure listing in the Honda Service Manual (HSM), followed by the Lock-up Control Solenoid Valve - Shift Control Solenoid Valve A Assembly test. My question concerns resistance readings on one of the...
2000 Honda Accord LX V6
150k miles
My stalwart 2000 Accord is an LX model, which means no keyless entry. I've endured two decades of inconvenience; now I wants keyless entry and remote ignition as well. So I'm researching various aftermarket products that offer a device that combines these two...
Thanks for the follow-up.
I'm honestly not certain of the consensus regarding the interval between this sort of service; though I'm certain solvent retailers would eagerly recommend frequent dosing.
What I'm trying to garner is the efficacy of this sort of solvent delivery method on the...
Thanks for your reply.
Since you have some experience with this tool, do you think the expense of owning the thing would be offset by used as part of a routine maintenance regime; like use it at each oil change, for example?
Anyone have experience with the OTC 7448A Fuel Injection Cleaner tool?
This thing is purpose-built to connect directly to the fuel rail (or just at the damper with an adapter) where it bypasses the fuel system and delivers fuel injector solvent under pressure (either their propriety brew...
i'm generally pretty good at the "keyword search" game in these forums. but i couldn't turn up anything with this topic (and so i posted).
care to post a link (or two) to the discussions you're familiar with?
2000 Accord LXv6
While sitting in traffic my eyes lit on my manual climate control. And I wondered...
Anyone know if the auto climate control unit (79600-S84-A41ZA) is harness/bolt-compatible with the manual control (79600-S84-A01ZA)? I realize the bezel would need to be changed from...
We're drifting off-topic here with the "engine swap" and "timing belt" tangents--and i'm contributing to it. If a discussion ensues on this topic, forklift it from this "Urgent - Help Quick" sub-forum into an appropriate sub-forum. with that caveat...
TANGENT
An engine swap is a major job, as...