★ Russianred's Turbo Build Thread! ★ *UPDATED 4/15* ★

[Russianred]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

Ah, here is that oversized seagull:

LOL That's funny, because Russian women and Russian vodka go hand in hand prettttyyy well!!

NSFW but sooooo worth it:
http://imhz.com/uploaded_images/kydex_holster_girl-777612.jpg

I'll leave it at that for now .

 

[Wildman]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

nice man must feel good!

 

[GlassJAw]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

What are you heading to OK to study Nikita??
I do hope you have a lock up of sorts to store this fly ride in whilst you're at school!!
Would hate to have all this hard work you've put into the car go to waste because of some theiving scum thinking the need it more than you do!!

Here's that big Seagul Reguritating a 300 Tonne Excavator

and for size comparrison here is my mate in front of it - hes 6ft tall

and one of those crazy Russian Trikes I spoke of...

 

[Steverino]

Re: Russianred's Turbo Build Thread! *UPDATED 5/25*

Too tired. I just realized what that plug was.. It goes to the knock sensor I don't have. When I converted to OBD1 I accidentally broke my knock sensor, and then realized that OBD1 doesn't even account for knock so it doesn't use the sensor so I left the plug unplugged! The answer was simple lol.

Wait so you are OBD1 now? How are you going to detect knock without a knock sensor? Wouldn't it be infinitely more helpful to know if you're detonating as well as proper AFR?

 

[Russianred]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

I won't be able to unless I get a P72, Right now I have been running a P28. I am not too worried about knock right now Steve, I'm tuned for 91 but have been running 91/93 interchangably. At a later time, I may get a standalone, or the P72 to replace my current ECU. I've been OBD1 since last July.

 

[Steverino]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

I won't be able to unless I get a P72, Right now I have been running a P28. I am not too worried about knock right now Steve, I'm tuned for 91 but have been running 91/93 interchangably. At a later time, I may get a standalone, or the P72 to replace my current ECU. I've been OBD1 since last July.

I keep forgetting you're running Crome. . .

 

[1NonlyAccord]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

hey man,kinda random..but what kind of oil return are you using and what fittings on the oil pan?
is it hondabond/ jb welded or welded?

 

[Russianred]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

Hey man,

I am using 45 degree 8 AN swivel fittings. Those, and the steel braided line are made by Russel. The oil pan was tapped and the 8 AN bung was properly welded into the oil pan.

Hondabond - absolute NO! Oil + Hondabond = gradual and effective disintegration.
JB Weld - works for a while, but highly a discouraged method as well.

 

[1NonlyAccord]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

^thanks for the info..you dont have any pictures to show do you? is it the one that you drill a hole,and it somewhat screws into the pan then weld/seal around it? Then added the 45 degree onto it?

 

[Russianred]

Re: Russianred's Turbo Build Thread! *UPDATED 5/29*

Yeah, it can be welded either to the outside of the pan, or from the inside of the pan. Make sure you have enough thread to attach the AN fitting. Will you be using 8 or 10 AN?

I don't have a pic at the moment.