Gradfien's 99 accord turbo sedan EX (56k)

Discussion in 'Members Rides' started by Gradfien, Feb 28, 2017.

  1. Gradfien

    Gradfien Active Member

    Posts:
    36
    Likes Received:
    0
    Joined:
    Feb 5, 2015
    Location:
    NE Ohio
    So ive been puting a lot of time into to my car recently and it seems like I haven't even got that much done. Every thing seems to be taking 3x as long as it should.

    So I:
    -Did an abs delete(hope speedo still works)
    -put in a wilwood adjustable perportioning vave
    -replaced all the brake lines with stainless.
    -replaced oil pan (poor quality weld job on turbo return bung on old pan.)
    -finshed hooking up all the turbo pluming
    -put in lower intake with fuel rail and injectors.
    - installed egr block off plate
    -installed torque damper
    - painted alot of random parts that i had to take off anyway.



    [​IMG][​IMG][​IMG]
    A good example of why I hate egr
    [​IMG][​IMG]
     
    Last edited: Jun 15, 2017
  2. Gradfien

    Gradfien Active Member

    Posts:
    36
    Likes Received:
    0
    Joined:
    Feb 5, 2015
    Location:
    NE Ohio
    So I believe my project is coming to a close. I had my car retuned and it hit 244 whp, unless like last time I didn't hear the tuner right. ill post the chart when I get it. I still have a bit of an exhaust leak up front that made a black spot on my valve cover but I quit caring.
    I think my wastegate diaphram might have gone bad too. which doesn't make any sense its practicaly brand new. (update my wategate is fine the hotrod sleeve didn't protect the lines very well so I replaced the lines with 1/4 brakeline.)
    It also needs some motor mounts.
    [​IMG]
     
    Last edited: Jul 22, 2017
  3. Gradfien

    Gradfien Active Member

    Posts:
    36
    Likes Received:
    0
    Joined:
    Feb 5, 2015
    Location:
    NE Ohio
    So I got my dynochart 244hp @ 12 psi
    Good enough for now[​IMG]
     
    Last edited: Jul 22, 2017
  4. Djscoon

    Djscoon New Member

    Posts:
    0
    Likes Received:
    0
    Joined:
    Jan 19, 2016
    Location:
    Florida
    Nice cg what program your using to tune and also what size injectors you have
     
  5. Gradfien

    Gradfien Active Member

    Posts:
    36
    Likes Received:
    0
    Joined:
    Feb 5, 2015
    Location:
    NE Ohio
    I used hondata so I didnt have to worry about finding a tuner. The rdx injectors I used are 410cc. The injectors are the limiting factor on my build, but with the stock internals I wouldn't want to push it any more.

    Sent from my SAMSUNG-SGH-I747 using Tapatalk
     
  6. dawg316

    dawg316 Well-Known Member

    Posts:
    180
    Likes Received:
    0
    Joined:
    Dec 25, 2016
    Location:
    canada
    244 nice,

    time to update the numbers in your sig
     
  7. Djscoon

    Djscoon New Member

    Posts:
    0
    Likes Received:
    0
    Joined:
    Jan 19, 2016
    Location:
    Florida
    okay thanks
     
  8. Djscoon

    Djscoon New Member

    Posts:
    0
    Likes Received:
    0
    Joined:
    Jan 19, 2016
    Location:
    Florida
    One more thing what is the dimensions of your intercooler
     
  9. Gradfien

    Gradfien Active Member

    Posts:
    36
    Likes Received:
    0
    Joined:
    Feb 5, 2015
    Location:
    NE Ohio
    I wrecked my car. it is still driveable but the frame and exhaust is bent. The car is not worth fixing i would like to sell it as a turbo kit. I would like to get 1500 for the whole car. the only part missing is the wiper assembly.
    It sat through the winter so the brakes are so rusty they don't work right. Please pm me if interested. There are some basic problems that could be fixed while you're swapping it over.
     

Share This Page