Interior Overhaul.....

hotaccord243

Well-Known Member
Joined
Sep 19, 2005
Posts
1,190
Reaction score
9
Location
SW suburbs, MN
The roll bar is autopower and just a bolt in.

So it's taking longer than i thought, and i like the suspense of posting pics.... haha

Last night i finally got the rollbar in and rear door cards and flip up center console. Still need to bolt it down. I also have the driver door card re-assembled.

Tonight i will be bolting the roll bar down and vacuuming also putting in the cross members to the roll bar along with final connections for the rear door cards.
I will also be re-assembling the pass. front door card and should have pics up tommorrow. It's quite timely to do all this stuff... but almost done!
 

hotaccord243

Well-Known Member
Joined
Sep 19, 2005
Posts
1,190
Reaction score
9
Location
SW suburbs, MN
Forgot the camera at home, so no pictures yet.

Got the rear door cards in correctly, and the roll bar bolted down last night. Took a lot of work to get that thing bolted down by yourself haha.

Sometime soon (could be Sunday at the lates) i will be installing the cross members to the roll bar, and front door panels, then i will have a huge update with pictures for the final product.
 

Aeraun

Well-Known Member
Joined
May 19, 2010
Posts
230
Reaction score
0
Location
Staten Island, New York
Looks great man. Sick job, especially for doing it yourself. I'm planning on doing all that to my car but probably toward the end of finishing the car. Going big though, gona make inside black and blue. No sure if I'm gona do it myself, but you just made think that I might just be able to lol
 

hotaccord243

Well-Known Member
Joined
Sep 19, 2005
Posts
1,190
Reaction score
9
Location
SW suburbs, MN
Okay, got it done last night (with exception of temporarily mounting the Nitrous bottle on the now non-existent rear-seats).

The seat belts were left OEM, just because didn't want to buy anything yet. But will most likely be the Sschroth DOT approved 4 point harnesses in black with the gold stitching to match everything else. but that is at a later date.

Final pictures took super late, and i was super tired, so sorry for the low quality, but thought i would get SOMETHING up soon! let me know what you think!

Rear door panel completed 1
CIMG2990.jpg


Rear door panel completed 2
CIMG2989.jpg


Front completed door panel
CIMG2991.jpg


Arm rests for front panel
CIMG2992.jpg


Center console
CIMG2993.jpg


Rear complete 1
CIMG2994.jpg


rear complete 2
CIMG2995.jpg


Front passenger
CIMG2996.jpg


front driver
CIMG2998.jpg


Front side view
CIMG3000.jpg
 
Last edited:

4NDR3W_6THG3N

Well-Known Member
Joined
Oct 4, 2009
Posts
374
Reaction score
1
Location
Fond du Lac, WI
That is the exact interior that I want. If I could do it all over, I'd have an 02 coupe 5spd man. with a spoiler and turbo it and have that exact interior. I want those seats and that momo wheel sooooooooooo bad. btw how much was the roll bar and where'd you get it? is it specific for our cars?? thanks.
 

hotaccord243

Well-Known Member
Joined
Sep 19, 2005
Posts
1,190
Reaction score
9
Location
SW suburbs, MN
That is the exact interior that I want. If I could do it all over, I'd have an 02 coupe 5spd man. with a spoiler and turbo it and have that exact interior. I want those seats and that momo wheel sooooooooooo bad. btw how much was the roll bar and where'd you get it? is it specific for our cars?? thanks.

It's a Sparco steering wheel btw....

Thanks! roll bar is from Autopower, it is specific for our cars, and i would say by the time you have it powdercoated and/or painted your looking at 800 roughly maybe?
 

Russianred

Snail Spools You!
Joined
Jan 10, 2007
Posts
9,458
Reaction score
50
Location
Southern Maine [207]
:drool: I knew you would pull off something as impressive as this. That interior is MINT! So glad you finally for it finished - looks so fresh and unique. Is it comfy?
 

Latest posts

Back
Top