NA F23 Dyno!!!

[BlkCurrantKord]

How much is Bisi charging for the springs? When I last exchanged e-mails with him he told me I'd have to send in my head b/c he's seen variances in either the diameter or height of F23 valve springs.

AFA - If you really wanted to, I could let you borrow my V. Stack/filter and TB when you do decide to dyno.

 

[NASOHC]

Have you experienced any valve lash with that cam? Just considering if it were aggressive enough to warrant the cost.

Nope, none at all.

How much is Bisi charging for the springs? When I last exchanged e-mails with him he told me I'd have to send in my head b/c he's seen variances in either the diameter or height of F23 valve springs.

AFA - If you really wanted to, I could let you borrow my V. Stack/filter and TB when you do decide to dyno.

I'll know tomorrow, he called me this morning and I schedule to meet with him tomorrow afternoon and discuss this stuff and I'll get pricing on valvesprings for you.

 

[AFAccord]

AFA - If you really wanted to, I could let you borrow my V. Stack/filter and TB when you do decide to dyno.

I've got an extra TB that I've been meaning to send off, and found a place to order a V stack/filter for $55 shipped, I've just been too lazy to send them off/order them.

I appreciate the offer tho man. What is your opinion on these mods?

I might take donations for dyno test of these items once I get them if people are interested.

 

[NASOHC]

How much is Bisi charging for the springs? When I last exchanged e-mails with him he told me I'd have to send in my head b/c he's seen variances in either the diameter or height of F23 valve springs.

AFA - If you really wanted to, I could let you borrow my V. Stack/filter and TB when you do decide to dyno.

I just got pricing on the valve springs (includes titanium retainers) $369

 

[BlkCurrantKord]

I appreciate the offer tho man. What is your opinion on these mods?

I've had the TB for quite awhile so I can't really comment on it much, I also added some other ported pieces at the same time that I swapped it on.

I've got the stack mounted on my 3" DC short ram and the recommended K&N filter. You can definately hear it sucking in the air just at idle, pulls pretty decent on the highway IMO.

 

[MrChad]

How street able are these Bisimoto and/or Webcams regrind camshaft?

Can they be used with OEM ECUs? Do they have to be tuned on a dyno with an adj. cam gear in place?

 

[GreddyAccord99]

I remember someone else dynoed at 139whp/144wtq with just bolt-ons. Very conservative tune

that was me, and no tune.


congrats on the numbers, its very impressive.

 

[AFAccord]

We Want Track Times!!

 

[NASOHC]

How street able are these Bisimoto and/or Webcams regrind camshaft?

Can they be used with OEM ECUs? Do they have to be tuned on a dyno with an adj. cam gear in place?

My WebCam is very streetable, does not need any ECM mods to run though Dyno will get the most power out of it. I did not use the Adj. gear as it does not work on this aplication.

We Want Track Times!!

I'm trying to skip early before my cousins wedding on the 26th - Fontana Raceway is open for runs once a month; otherwise, I'll have to wait till next.