CEL Codes

Discussion in 'Accord Tech' started by Wildman, Sep 6, 2005.

Page 4 of 7
  1. Nov 26, 2009 at 9:25 AM #31
    f23accord2000

    f23accord2000 Well-Known Member

    Age:
    40
    Posts:
    1,113
    Likes Received:
    10
    Joined:
    Feb 18, 2007
    Location:
    gloucester mass
    i got the same code a while back yess it is the thermostat i went to the parts store make sure you get a 180 degree one and install it should be good


     
  2. Nov 26, 2009 at 9:28 AM #32
    f23accord2000

    f23accord2000 Well-Known Member

    Age:
    40
    Posts:
    1,113
    Likes Received:
    10
    Joined:
    Feb 18, 2007
    Location:
    gloucester mass
    Which is a sensor inside the distributor housing which tells the the FI
    computer the position of #1 cylinder. check the cap and rotor and all plugs if not its the distributor,its basicly a missfire


     
  3. Nov 26, 2009 at 9:29 AM #33
    f23accord2000

    f23accord2000 Well-Known Member

    Age:
    40
    Posts:
    1,113
    Likes Received:
    10
    Joined:
    Feb 18, 2007
    Location:
    gloucester mass
  4. Nov 26, 2009 at 11:07 PM #34
    finch13

    finch13 Well-Known Member

    Posts:
    5,025
    Likes Received:
    41
    Joined:
    Apr 2, 2008
    Location:
    Twin Cities, MN
    ^ Love that site!
     
  5. Nov 28, 2009 at 10:11 PM #35
    MrLazie1

    MrLazie1 Well-Known Member

    Posts:
    2,171
    Likes Received:
    3
    Joined:
    Nov 11, 2008
    Location:
    LA to SGV
    i know what it is. and i got all the checking stuff done. i just need to check one more thing and probably need to replace the distributor. if i replace the distributor, does anyone know what else i should also replace. for example, like water pump would need to also replace the timing belt.
     
  6. Nov 28, 2009 at 11:30 PM #36
    Drift

    Drift Well-Known Member

    Age:
    41
    Posts:
    1,333
    Likes Received:
    22
    Joined:
    Aug 8, 2007
    Location:
    Mass

    Nope. The dizzy is on the other side. 3 bolts and a couple connector and the job is done.
     
  7. Dec 30, 2009 at 8:34 PM #37
    Caumeme09

    Caumeme09 Banned

    Posts:
    8
    Likes Received:
    0
    Joined:
    Oct 3, 2009
    Location:
    Germany
    so my cousin bought a 94 accord this past week with an h22 in it. the cel is on and codes are 1 o2 sensor, 10 iat, 15 ignition output signal, 17 vss. Can someone please help me. im a b series guy and have no idea with h series. Im sure i can figure it out but any input is helpful. Also, anyone know where i can get an ecu pinout for this thing?
     
  8. Jun 6, 2010 at 12:34 AM #38
    98acclude

    98acclude Well-Known Member

    Age:
    35
    Posts:
    635
    Likes Received:
    0
    Joined:
    Jul 29, 2008
    Location:
    Joplin Missouri
    are these codes the same with H series? also can I jump the same wires to get the codes with a p5p (jdm type s) ecu? any help is appriciated
     
  9. Sep 13, 2010 at 7:21 PM #39
    Sinful

    Sinful Well-Known Member

    Posts:
    685
    Likes Received:
    5
    Joined:
    Dec 20, 2006
    Location:
    San Diego, CA
    thanks for the cel codes:)
     
    Last edited: Sep 13, 2010
  10. Feb 27, 2011 at 9:39 PM #40
    Zack Heisenberg

    Zack Heisenberg Member

    Posts:
    13
    Likes Received:
    0
    Joined:
    Feb 3, 2011
    Location:
    Alberta
    I jumped pins 4 and 9 with a paper clip, and my ABS light is the one that blinked 5 long and 3 short flashes. Probably jumped the wrong pins, lol, but I would guess the code is the same.

    [EDIT] Since there is no code 53, my guess that the original turning on of the light counts as a flash, and that puts it at code 63 - secondary O2 sensor, which is exactly what I thought it would be. It came on after I modified my headers, and again after my exhaust, but usually only when it's minus 15C or lower.
     
    Last edited: Feb 27, 2011
Page 4 of 7

Share This Page