DIY: Automatic to Manual Transmission Swap

Daproblem23

Member
Joined
Mar 22, 2013
Posts
5
Reaction score
0
Location
Atlanta
Hey all for some odd reason when I plug in my p13 ecu to my car it make car idle bounce from 1000-1500 the p28 is even worst but when I plug up the jdm Pcf ecu everything works fine problem is I have a 5 speed And can't use the jdm ecu any fix on my idle bounce
 

honda_egf22

Active Member
Joined
Jun 14, 2013
Posts
30
Reaction score
0
Location
utah
On the main trans plug I dont have the red, grey and black wires. I have a red w black stripes. Is that considered as the red wire. And I cannot locate the grey wire. My ride is a 98 4 door sedanand use to be ulev but now its using a non ulev engine but using ulev engine harness. Need help asap please
 
Last edited:

BlkCurrantKord

Super Moderator
Joined
Sep 7, 2005
Posts
9,870
Reaction score
85
Location
Ohio
At this point - less information is key.

Post a picture of the harness plug that you're using.
 

honda_egf22

Active Member
Joined
Jun 14, 2013
Posts
30
Reaction score
0
Location
utah
I tried but they said I have to be a member for at least 7 days.

All wires I see are yellow, white, black, baby blue, brown, pink, light blue, blue w/ white line and black w/ blue lines and red w/ black line's. I know this is the main trans harness but no grey or red. Very doomed. I know their got to at least be 5 others who had this problem
 

honda_egf22

Active Member
Joined
Jun 14, 2013
Posts
30
Reaction score
0
Location
utah
Unless the diy instructions stated grey and red wires from the transmission harness on the transmission and not the actual engine harness.
 

SuperMidget

Well-Known Member
Joined
May 13, 2010
Posts
141
Reaction score
0
Location
Edmonton, AB
AAHH! CAN'T WAIT!!

Starting my 5 speed swap this weekend :hide:

This thread still alive? I could use peoples input ...
 

honda_egf22

Active Member
Joined
Jun 14, 2013
Posts
30
Reaction score
0
Location
utah
This is my main big trans harness. It has a few of same colors as original posters pix but no red and grey wire. Anyone have the same issue as me. Unless this isn't the main trans plug on my engine harness. Help please. Someone has to have had this problem.

O.P. has this plug too and his plug looks almost like mines. Except no red wire or grey wire

 
Last edited:

honda_egf22

Active Member
Joined
Jun 14, 2013
Posts
30
Reaction score
0
Location
utah
<a href="http://s100.photobucket.com/user/punk_rock_korean/media/IMG_20130614_110621_189_zpsd69550e4.jpg.html" target="_blank"><img src="http://i100.photobucket.com/albums/m10/punk_rock_korean/IMG_20130614_110621_189_zpsd69550e4.jpg" border="0" alt=" photo IMG_20130614_110621_189_zpsd69550e4.jpg"/></a>
 

Latest posts

Back
Top