4NDR3W_6THG3N
Well-Known Member
The boat look only happens with Eibach Sportlines? My Tein-S Techs won't have that effect right?
DIY: "Boat look" Remedy for Accords on Lowering Springs
- Thread starter AFAccord
- Start date
NashvegasCG
Well-Known Member
The boat look only happens with Eibach Sportlines? My Tein-S Techs won't have that effect right?
not necessarily, I've seen this on a few different spring types.
FunnyVictor86
Well-Known Member
The boat look only happens with Eibach Sportlines? My Tein-S Techs won't have that effect right?
unfortunately, yes ... on stock 16 inch wheels it wasn't so bad, but it was very noticeable when i was on s.tech's and had my old 18 inch zenetti wheels on low pros
Yes they will. I have the s-techs and still did the boat mod.
4NDR3W_6THG3N
Well-Known Member
FML. Well the sidewalls on my 17 inch summer tires are only 40. At least I'll get a good laugh out of it when I put them on with the springs... 
Chorilored
Well-Known Member
I did this mod like 2 weeks ago and everything worked fine. I have neuspeed sport springs, so now it should be 2.2 inch drop in the front. The only thing i was worried about was the right fork, i bored it out a lil too much and I made a hole
Besides that its great!
Besides that its great!NashvegasCG
Well-Known Member
I did this mod like 2 weeks ago and everything worked fine. I have neuspeed sport springs, so now it should be 2.2 inch drop in the front. The only thing i was worried about was the right fork, i bored it out a lil too much and I made a hole
that why i went with the trial and error method, so that i didnt do to much at once.
swollen_cu
Well-Known Member
Ejhh if it was me, I'd just cut half a coil off the front... lol Since the accord isn't a track car or anything, I wouldn't care.
IMO I'd feel safer cutting my springs half a coil than cutting my strut fork.
IMO I'd feel safer cutting my springs half a coil than cutting my strut fork.
