ZFreak's RB26DETT Z32 300zx build...
- Thread starter ZFreak
- Start date
Should have charged a dollar a view
everyone from cb7tuner is going crazy ahahaha, preading all over
sup dude
http://www.youtube.com/watch?v=nio5fl-5jPc&context=C3167ef3ADOEgsToPDskIpLOv0v4TwkjHqXDuY3Ath Here's one with me messing with microphones... ignore the CEL... VG30 has one knock sensor, RB26 has two, and it's messing with the readings and the light goes off on the dash, but all is ok!
This was just a partial throttle to mess with how it sounds, etc.
EDIT>> Later that night, I had a coolant hose blow, so it's back sitting in my garage for a weekend or so. One of the (many) throttle body springs was rubbing against the heater core hose and wore a hole in it. (RB26 has 6 independent throttle bodies, and springs all over the place).
And for those that didn't see it, here's the 30-140mph run again, low boost:
http://www.youtube.com/watch?v=A7VEN41YOOQ&context=C3e6634aADOEgsToPDskL548oFSYdnTfpFZz9eZ1Dp
I'll have more up when I get the coolant leak fixed. Enjoy.
This was just a partial throttle to mess with how it sounds, etc.
EDIT>> Later that night, I had a coolant hose blow, so it's back sitting in my garage for a weekend or so. One of the (many) throttle body springs was rubbing against the heater core hose and wore a hole in it. (RB26 has 6 independent throttle bodies, and springs all over the place).
And for those that didn't see it, here's the 30-140mph run again, low boost:
http://www.youtube.com/watch?v=A7VEN41YOOQ&context=C3e6634aADOEgsToPDskL548oFSYdnTfpFZz9eZ1Dp
I'll have more up when I get the coolant leak fixed. Enjoy.
Last edited:
LeBirdNest
Titleist
Russianred
Snail Spools You!
Great success very naiiice! Wish I could get a ride in that beast. I'll get to RB26DETT status one day, I'm serious.
