Wheel Fitment Thread

[subrezz]

hey guys. I got a 02 sedan and im wondering how this setup will treat me. Fnf type 1's, probably an inch off the ground or so + 17x9 +15 4x114.3, 205/40/17. rolled fenders? does anyone have a setup like this?

 

[cjsaccord]

Which would require the least amount of work to fit? also would 18x8.5 +25 be poking? also which would give me the best stance?
18x10 +25 all around with 3.5" lip
or
18x8.5 +25 all around with 1.75" lip

 

[scrapnav6]

18x8.5 + 25 will not poke. 10.5 will unless ur pretty darn low

 

[cjsaccord]

18x8.5 + 25 will not poke. 10.5 will unless ur pretty darn low

cool, so i wouldn't need to pull my fenders on 18x10 wheels? also would the front be flush or mexi-flush, im not sure how much of a difference the front and rear wheels hubs stick out on the coupes?

 

[truWarier02]

hey guys. I got a 02 sedan and im wondering how this setup will treat me. Fnf type 1's, probably an inch off the ground or so + 17x9 +15 4x114.3, 205/40/17. rolled fenders? does anyone have a setup like this?

You must roll fenders and at least pull the fronts.

Here's a similar setup (LowerMyCG5)
17x9 +12, 205/45

 

[subrezz]

You must roll fenders and at least pull the fronts.

Here's a similar setup (LowerMyCG5)
17x9 +12, 205/45

will the ride be rough on my body/frame ?

 

[LowerMyCG5]

will the ride be rough on my body/frame ?

That should answer your question

 

[RedRyder]

"Alright, I'll do it!"

 

[Valet]

That should answer your question

 

[subrezz]

That should answer your question

you think if i put a skid plate on the bottom of my car I could avoid that?